-
Floppy Drive Emulator Software카테고리 없음 2020. 1. 23. 17:22
May 23, 2019 The aim of HxC Floppy Emulator project is to provide an software and hardware solution to replace the old floppy disk drive by an another modern solution (USB, SDCard.) HxC Floppy Drive Emulator download SourceForge.net.
Updated information on the floppy disk drives hardware interfaces and FDD emulators to replace 3.5 inch, 5.25 inch, and 8 inch floppy disk drive units. These devices are not external USB floppy disk drives, but direct floppy disk drive replacements for internal original equipment manufacturers floppy disk drives. In other words, if the OEM computer has a standard 34 pin floppy disk drive cable, these devices are plug and play. No USB port is required on the OEM computer for the floppy emulators to function. This is follow up information to my first article on the subject:Pictured above from right to left are old legacy 3 1/2, 5 1/4, and 8 inch floppy disk drives which have been installed in OEM computers.
The floppy disk drive emulators replace these old legacy floppy disk drives with a simple plug-and-play emulator device. No computer USB ports are required for operation. Notice on the picture above, the standard 34 pin floppy disk connector and the standard power connector. These connectors are plugged into the existing OEM computers, (where a floppy disk drive would be installed) and the front side is where the USB stick would be inserted.The beauty of this device is that no driver or configuration software is required to install and operate this floppy disk emulator with old legacy equipment. The manual states, “Many machines and devices are still using floppy disk drives as the only means of data input. CNC, milling, injection mold, or embroidery machines, laser cutting devices and integrated control systems, just to mention a few, are still being fed data with floppy disks several times a day.”The Next Floppy Disk Emulator DevicePLR Electronics – 3 ½ floppy drive to USB flash drive reader upgradePLR Electronics specializes in the embroidery machine circuit boards. They also have been involved in repairing other circuit board equipment too.
PLR Electronics sells the. PLR Electronics claims that the device will “work successfully on CNC Machines Embroidery Machines Keyboards Knitting Machines Diagnostics Machines Cutters Routers And most any machines with a Floppy Disk Drive.”The backside of the emulator has the power connection plug and the floppy disk drive cable plug. Simply remove the old floppy drive cable and power connection, and plug it into the FDD emulator.
Floppy Drive Emulator Software
The front side of the device has the USB Flash Drive Port, a File Chooser Connector Port, and even a Network port connection to another computer. The file chooser provides a means of selecting which files on the USB Flash Drive you wish to choose.There are a number of modes of operation. SFDR-1, SFDR-II (SFDR-1 + File Chooser), plus other modes of operation:We request that you inform us on the original floppy drive type when placing an order to avoid mismatching the drive type. For example:. SFDR-I-I————–Universal IBM type. SFDR-I-A————-YD-6639D, TEAC235FG. SFDR-I-B————-NEC 1137C.
SFDR-I-C————-YD-6037DThe picture below shows how the Floppy Drive Emulator from PLR Electronics would be installed. Installation Instructions:To install your 3 1?2 floppy to USB Flash Reader, with the device powered off and unplugged, simply remove the existing drive from its existing cradle. Disconnect existing ribbon cable and power cable from existing drive.
Reattach existing power cable and ribbon cable to the USB Flash Reader. Insert USB Flash Reader into existing 3 1?2 floppy cradle and reattach all hardware. Your device is now ready to use. If any existing configuration is required on your system, please use all standard settings for a 3 1?2 floppy drive as detailed in your devices user manual.Once the floppy emulator is installed, you then can use any USB Flash Stick as your floppy drive. In other words, you use a portable USB stick as the floppy. The original floppy cable plugs directly into the floppy emulator. These are not external USB floppy drives.I would also imagine (though I have not confirmed) that if there were two floppy drives on the OEM equipment to begin with, you could hook up one of these devices and copy from one of the original floppy drives to the new emulated floppy drive onto a USB stick.This is a plug and play device also.
The provides some Frequently Asked Questions that are very informative.Frequently Asked QuestionsFAQs- Q – Will this device work with a Windows NT operating system?A – YES. This device should work with any OS assuming it is capable of working with IBM type floppies.- Q – Will the 3 1/2 floppy to USB drive work in a XXXXXXXXX that can only read 720k 3 1/2 floppies?A – Yes- Q – We have XXXXXXX machines here and the floppy disk is 720K. IF we put a 1.44k in the machine the floppy drive does not work. Do you have a 720K mode on your device? TA – Yes- Q – Hi I am presently using a XXXXXXX keyboard which uses floppy disks on which I play my music files.
Can this flash drive reader be used in my case?A – Yes it will.- Q – Hi, I currently have a floppy disk drive that is half the height of a standard drive. How can I modify this to work?A – You do not need to modify anything.
Free Floppy Drive Emulator
We offer a laptop height version. Please ask for this version when placing your order.- Q – Is it USB 2.0?A – No, its standard USB. However, USB 2.0 is used primarily for high speed data transfer. In this instance, the files you are using are very small so, there will be no noticeable difference.C.
On to the next storage systems emulators for replacing floppy disk drive units.Data Storage DTX-200 Floppy Disk Drive Emulator, located in France, sells the to replace legacy disk drives, such as Fujitsu MK2322, Control Data FSD515, Ampex, Maxtor XT1140, as well as tape drives. Datex manufactures the DTX-200 Floppy Disk Drive Emulator. The DTX-200 is designed for directly replacing 3 1/2, 5 1/4, and 8 inch floppy disk drive units.There are numerous options available for the Datastorage DTX200. Compact Flash cards or USB keys can be used to store data on.
Usb Floppy Drive Emulator Software
The cost of these Floppy Disk Drive Emulators vary considerably. At this time, I am not going to post the individual prices, because they are probably changing as I write this. The FDD Emulators go from approximately 275 USD to 1,100 USD and the cost could be more expensive depending on the added options.
The links are there to the companies and the emulators in this article to compare the costs yourself.Which one is best for your application?There are pros and cons to each of the above floppy disk drive emulators. Some have more options than others. Certainly some of them are significantly more expensive than others, but that is not the only criteria that should be used in the evaluation process. To the retro guy, Gavin,I disagree with your analysis that floppy emulators are “not needed in any form at all.”In the industrial sector, there are many machines that output hundreds of thousands of dollars of production each and every month. The machines are still very good for doing production, however, the operating system is being loaded from floppy disk drives that are still loaded from either 5.25 or 3.5 inch floppy disks. Many of the manufacturers are no longer in business to support the equipment, and the best thing would be to put a solid state floppy disk drive emulator to do away with the old floppy drives. It is not just about the floppy drives but the medium itself is no longer viable.
The software disks are going bad, and even if you get another used floppy drive, the floppy disks are scratched to the point that eventually the machine will become a big boat anchor.However, if the information is able to be stored on say a flash drive or USB drive, through a floppy disk drive emulator, the equipment could be keep running for the long haul.So, quit thinking on a small PC scale, and think about all the machinery that is built to run from floppies that is still in production today. Manufacturers can not afford to spend a half a million dollars on a brand new machine.